HD Standard Crossover Steering Kit - Jeep XJ / MJ / ZJ / TJ / LJ
$240.00
PRODUCT DESCRIPTION
Enhance your Jeep’s steering with the CavFab Standard Crossover Steering Kit, designed for XJ, MJ, ZJ, TJ, and LJ models equipped with Dana 30 front axles. This heavy-duty steering kit delivers exceptional durability and precise handling, ensuring smooth and confident performance on-road and off. Expertly engineered for reliability, it’s a must-have upgrade for serious Jeep enthusiasts.
VEHICLE FITMENT
1984 - 2001 Jeep Cherokee XJ
1986 - 1992 Jeep Comanche MJ
1993 - 1998 Jeep Grand Cherokee ZJ
1997 - 2006 Jeep Wrangler TJ and LJ (NON Rubicon)
NOT compatible with the Rubicon D44 Front Axle (High Clearance Crossover Kit is needed to work with this front axle)
MUST remove sway bar and sway bar tabs to run this kit (High Clearance Crossover Kit does not require removal of sway bar)
4.5" of Backspacing or Numerically Less Required (Stock will not fit without wheel spacers)
1.5"of lift or more required, topping out at a safe placement at 6"
FEATURES
High Impact Resistance and Durability
1.5" SOLID 1045 Steel Tie Rod & Drag Link
12% Stronger than 1026 DOM kits
NO Welded Bungs to Fail
Fully Machined for the Ultimate Strength
High Quality Heat Treated Chromoly Heim Joints
Grade 8 Hardware INCLUDED
Raw Steel or Powder Coated Options
WHATS INCLUDED
(1) 1045 Solid Steel Tierod
(1) 1045 Solid Steel Draglink
(1) 3/4 x 5/8 Right Hand Heim
(1) 3/4 x 5/8 Left Hand Heim
(1) 3/4 x 3/4 Right Hand Heim
(1) 3/4 x 3/4 Left Hand Heim
(2) 3/4 Right Hand Jam Nuts
(2) 3/4 Left Hand Jam Nuts
(4) Misalignment Spacers
Grade 8 Mounting Hardware
NOTES / MODIFICATIONS
Requires drilling of both knuckles and pitman arm to 5/8"
The standard/straight bar kit may require clearance of track bar bolt head
Grinding the Spring perches for clearance
If you wish to retain your Sway Bar the sway bar tabs must be removed and relocated (you can fabricate your own mount relocating the sway bar tabs, but we do not currently offer one)
If you do not wish to perform these modifications, please see our HD High Clearance Crossover Steering Kit
The CavFab Cross Over Steering kit can be ran either Under the Knuckle (UTK) or Over the Knuckle (OTK) after drilling
