Search
0 Cart

Jeep Gladiator JT

Jeep Wrangler JL

Jeep Wrangler JK

Jeep Wrangler TJ / LJ

Jeep Cherokee XJ

All CavFab Products are 100% made in the USA

Armor / Accessories

Suspension

Steering

Axle / Differential

Apparel / Swag

All CavFab Products are 100% made in the USA

Lead Times

    Shipping Returns / Cancellations

      Warranty

        Knuckle Swap Steering System (WJ) - CavFab

        CF384

        WJ Knuckle Swap Steering System - Jeep XJ / MJ / ZJ / TJ / LJ

        $269.99

        PRODUCT DESCRIPTION

        This kit is designed exclusively for models with a WJ knuckle swap (not compatible with a stock WJ). If you’ve upgraded to 1999-2004 Jeep Grand Cherokee knuckles, CavFab offers the most cost-effective steering solution. Benefits of the WJ knuckle swap include a raised drag link mount for flatter steering angles, independent tie rod and drag link mounts to reduce stress, and compatibility with the larger dual-piston WJ brake setup. As with our standard Crossover Steering System, this kit requires drilling the knuckles and pitman arm to accept 5/8" hardware. Beyond that, it’s a 100% bolt-on upgrade for enhanced performance and durability.

        VEHICLE FITMENT

        • Any of the following models with a WJ Knuckle Swap:
        • 1984 - 2001 Jeep Cherokee XJ
        • 1986 - 1992 Jeep Comanche MJ
        • 1993 - 1998 Jeep Grand Cherokee ZJ
        • 1997 - 2006 Jeep Wrangler TJ and LJ
        • 4.5" of Backspacing or Numerically Less Required (Stock will not fit without wheel spacers)
        • 1.5"of lift or more required, topping out at a safe placement at 6"
        FEATURES
        • High Impact resistance and Durability
        • 1.5" SOLID 1045 Steel Tie Rod & Drag Link 
        • 12% Stronger than 1026 DOM kits
        • NO Welded Bungs to Fail
        • Allows you to retain the Sway Bar 
        • Fully Machined for the Ultimate Strength
        • High Quality Heat Treated Chromoly Heim Joints
        • High Clearance Design
        • Grade 8 Hardware Included
        • Raw Steel or Powder Coated Options

        WHATS INCLUDED

        • (1) 1045 Solid Steel Tierod
        • (1) 1045 Solid Steel Draglink
        • (1) 3/4 x 5/8 Right Hand Heim
        • (1) 3/4 x 5/8 Left Hand Heim 
        • (1) 3/4 x 3/4 Right Hand Heim
        • (1) 3/4 x 3/4 Left Hand Heim
        • (2) 3/4 Right Hand Jam Nuts
        • (2) 3/4 Left Hand Jam Nuts
        • (4) Misalignment Spacers
        • Grade 8 Mounting Hardware

        NOTES

        • Drilling of both knuckles and pitman arm to 5/8" required
        • This is for Jeeps with the WJ Knuckle Swap
        • If you have factory knuckles and are looking for a steering system click HERE

        You may also like

        Search