Search

Current Lead Times

The information below will refer to lead time before shipping. 
.
Hey, Folks. While we hope to get everything out as quickly as possible, we are sometimes beholden to supply chain and manufacturing time constraints. We stand by our product and know that it is worth the wait when we have one, so please be a little patient with us. 
.
Keep in mind: if you order after Noon ET, the lead time begins the following business day, and weekday holiday days when we are closed do not count in lead time days (As we aren't here to work on it). We are open Monday-Thursday 7AM to 5:30 PM ET for calculation purposes.
.
We will typically send these at the same time as to keep these order cohesive--which will typically mean the further lead time, but sometimes may send out parts that are a shorter lead time earlier if it makes sense for us. For very small parts we will often be containing this in the larger box.  
.
-Crossover Steering [Raw Steel] (including Knuckle Swap): 1 Week
-Crossover Steering [Powder Coated] (including Knuckle Swap): 1-2 Weeks 
-Crossover Steering [Aluminum] (Standard): 2-3 Weeks 
-JK 1 Ton Steering [Raw Steel]: 1 Week
-JK 1 Ton Steering [Powder Coated]: 1-2 Weeks
-JK 1 Ton Steering [7075 AL]: 1 Week
-JL 2.5 Ton Steering: 3-4 Weeks
-Rebuild Kits: 1 Week
-Small Components: 1 Week. (Tie Rod Ends / Stabilizer brackets / Fairlead & Light mounts / Sway Bar Tabs / etc.) 
-DIY Parts: 1 Week.
-Trackbar (OTA) [Raw Steel]: 1 Week
-Trackbar (OTA) [Powder Coated]: 2-3 Weeks
-Trackbar (Adjustable) [Raw Steel]: 1 Week 
-Trackbar (Adjustable) [Powder Coated]: 2-3 Weeks 
-Trackbar Brackets and Braces [Raw Steel]: 1 Week
-Trackbar Brackets and Braces [Powder Coated]1-2 Weeks
-Short Control Arms [Raw Steel]: 1 Week 
-Short Control Arms [Powder Coated]: 1-2 Week
-Alpha 3-Link Long Arm Kit [Raw Steel]: 1-2 Weeks 
-Alpha 3-Link Long Arm Kit [Powder Coated]: 3-4 Weeks 
-Bumpers (All): 1-2 Weeks
-Tire Carriers: 1-2 Weeks 
-Diff Covers: 1 Week
-Most Armor (Tire Carrier License Brackets, Delete Plates, Stiffeners, Crash Bar, -Skids, etc.): 1-2 Weeks
-Fender Flares: 2-3 Weeks
-Inner Fenders: 2-3 Weeks (JL, JT, TJ/LJ)
-LJ/TJ Corners and Rockers: 2-3 Weeks
-JL Slider Steps: 5-6 weeks
.
If your specific product is not listed, feel free to email us at info@cavfab.com
.
Any order being cancelled is subject to a 5%* cancellation fee as noted on the Shipping / Returns & Cancellations page. Additionally, any order that is put on hold during the possible cancellation will have a pause in their lead time. (If you order 3/1, have a hold on 3/3, and don't contact us to take it off hold until 3/23, 3 weeks lead has not passed, just two days. The lead times are here for a reason, and holds are not worked on because they are held)
If the order ships and you still wish to cancel, you will forfeit the cost of the shipping as well as the Restock Fee will be assessed at 20%. Please be sure what your ordering is what you wish to order.
.
(*Cancellations during Site-Wide Sales are subject to a 10% Cancellation fee, as we are getting those out fast enough, it is a partial restocking fee in addition to the cancellation fee.)

Search