1 Ton Steering Kit Tie Rod & Drag Link [7075 Aluminum] - BOLT ON (JK)

Be sure to check out our Current Lead Times before purchase.
The factory JK steering system is not up to the task of larger tires and off-road abuse. Our JK Aluminum 1 Ton Steering Kit is a direct replacement to the stock components for a front Dana 30 or 44 axle JK, and is a 100% bolt on upgrade, no drilling or reaming required! Our 1 Ton Aluminum System is constructed of 1.5" 7075 Aluminum, commonly referred to as "memory metal". The Aluminum will always bend back straight if it comes into contact with a rock or other obstacle off-road. This kit also includes new HD 1 Ton Tie Rod ends. Similar to the factory rod ends, however our 1 ton rod ends are substantially larger and will outlast the small factory tie rod ends. Our 1 Ton Aluminum Steering System will give you tight responsive steering on the street, and will allow you to no longer worry about damaging your steering off-road. We also offer this kit in steel for those that do not have a need to move to aluminum.
  • Fits all 07 - 18 Jeep Wrangler JK and JKU with 2" lift or more
  • Direct bolt on installation, no drilling or reaming required!
  • 1.5" 7075 Aluminum Tie Rod & Drag Link
  • Includes New 1 Ton HD Rod Ends (Be sure to keep these well maintained/properly greased for maximum life) 
  • Designed, Engineered, Tested, and Built here in the USA
  • Ships in raw aluminum, no need to paint or powder coat, the aluminum will not rust!
  • Includes all required components / hardware needed for installation
**This is our FULL steering system and includes both the Tie Rod & Drag Link. We also sell these components separately if you do not need both! We also offer this kit with a flipped drag link option.

*We recommend this kit be installed with aftermarket wheels, the factory 17" JK wheels to not have a sufficient backspacing to allow for the larger rod ends to clear. A wheel with 4.75" Backspacing or Numerically less. If you run factory wheels with a 1" or larger wheel spacer this will suffice also.

* Designed to work with factory trackbar and stabilizer axle mounts. We cannot guarantee fitment with aftermarket relocation brackets*

*If you have any questions about fitment with a particular wheel, feel free to contact us for assistance.

*Due to supply chain issues, the rod ends in this kit may not be from the same supplier and may have minor visual differences between one another*