Search

CF-JK-UTK-DRAGLINK-RAW

1 Ton Drag Link - BOLT ON (JK/JKU)



PRODUCT DESCRIPTION



Our 1 Ton JK Bolt On HD Drag Link is a direct factory replacement, no drilling or reaming required, simply remove the old one, and install our new one! The Factory Drag Link on the JK is simply not up to the task of holding up to larger tires. The drag link sees a lot of force turning large tires on and off-road, causing it to be susceptible to buckling or bending. Also, being that the drag link is the connector between your steering gear box and axle, a failure will leave you stranded on the trail. Finally, the factory tie rod ends on the JK will wear pre-maturely leading to poor steering and even Death Wobble. Our HD Drag Link System replaces the entire drag link with a heavy duty system designed and manufactured here in house. We use SOLID 1.5" 1045 Alloy Steel which is exponentially stronger than the factory material used. Our HD Drag Link System is able to take the force of turning large tires on the street or trail without the fear of bending. Our 1 Ton Tie Rod Ends are much larger than the factory tie rod ends, and are directly greaseable via a zerk fitting (These require some maintenance for maximum life). These will provide a quiet and factory like steering characteristic. As always this product is backed by the CavFab NO BS Warranty.


VEHICLE FITMENT

  • 2007 - 2018 Jeep Wrangler JK and JKU (2 Door and 4 Door)
  • Minimum 2" of lift


FEATURES

  • Direct Bolt On! No Drilling, Reaming, or Cutting!
  • Manufactured from 1.5" SOLID 1045 Alloy Steel (Not hollow DOM like the competition) 
  • Designed, Engineered, Tested, and Built here in the USA
  • Ships Raw Steel, ready to be coated (Satin Black Powder Coat Option Available)
  • Designed to work with the stock axle side track bar / Stabilizer mount (Aftermarket track bar mounts may not work)
  • Not compatible with the Fox or Falcon ATS Stabilizers (Through Shaft). Compatible with all stabilizers.

 

NOTES

 

*We recommend this kit be installed with aftermarket wheels, the factory 17" JK wheels do not have a sufficient backspacing to allow for the larger rod ends to clear. A wheel with 4.75" Backspacing or Numerically less. If you run factory wheels with a 1" or larger wheel spacer this will suffice also. If you have any questions about fitment with a particular wheel, feel free to contact us for assistance.

*We also offer the drag link in 7075 aluminum!

Search