Knuckle Swap Steering System (WJ) - CavFab

CF384

WJ Knuckle Swap Steering System - Jeep XJ / MJ / ZJ / TJ / LJ

$289.99
/
Shipping calculated at checkout.
  • Designed for Jeeps with WJ knuckle swap
  • 1045 steel bars, fully machined ends
  • Chromoly heims, sway bar compatible
Finish
PRODUCT DESCRIPTION
This kit is designed exclusively for models with a WJ knuckle swap (not compatible with a stock WJ). If you’ve upgraded to 1999-2004 Jeep Grand Cherokee knuckles, CavFab offers the most cost-effective steering solution. Benefits of the WJ knuckle swap include a raised drag link mount for flatter steering angles, independent tie rod and drag link mounts to reduce stress, and compatibility with the larger dual-piston WJ brake setup. As with our standard Crossover Steering System, this kit requires drilling the knuckles and pitman arm to accept 5/8" hardware. Beyond that, it’s a 100% bolt-on upgrade for enhanced performance and durability.
VEHICLE FITMENT
  • Any of the following models with a WJ Knuckle Swap:
  • 1984 - 2001 Jeep Cherokee XJ
  • 1986 - 1992 Jeep Comanche MJ
  • 1993 - 1998 Jeep Grand Cherokee ZJ
  • 1997 - 2006 Jeep Wrangler TJ and LJ
  • 4.5" of Backspacing or Numerically Less Required (Stock will not fit without wheel spacers)
  • 1.5" of lift or more required, topping out at a safe placement at 6"
FEATURES
  • High Impact resistance and Durability
  • 1.5" SOLID 1045 Steel Tie Rod & Drag Link
  • 12% Stronger than 1026 DOM kits
  • NO Welded Bungs to Fail
  • Allows you to retain the Sway Bar
  • Allows you to retain the stock track bar mount
  • Fully Machined for the Ultimate Strength
  • High Quality Heat Treated Chromoly Heim Joints
  • High Clearance Design
  • Grade 8 Hardware Included
  • Raw Steel or Powder Coated Options

WHAT'S INCLUDED

  • (1) 1045 Solid Steel Tierod
  • (1) 1045 Solid Steel Draglink
  • (1) 3/4 x 5/8 Right Hand Heim
  • (1) 3/4 x 5/8 Left Hand Heim
  • (1) 3/4 x 3/4 Right Hand Heim
  • (1) 3/4 x 3/4 Left Hand Heim
  • (2) 3/4 Right Hand Jam Nuts
  • (2) 3/4 Left Hand Jam Nuts
  • (4) Misalignment Spacers
  • Grade 8 Mounting Hardware

NOTES

  • Drilling of both knuckles and pitman arm to 5/8" required
  • This is for Jeeps with the WJ Knuckle Swap
  • If you have factory knuckles and are looking for a steering system click HERE
  • The Crossover Steering kit does not convert to this kit as the bars are different lengths

Product Specifications

No file available

Assembly Instructions

No file available

Here at CavFab we utilize UPS Ground and USPS Priority shipping. Once your order ships, you’ll receive an email with your shipping details and tracking number. This way, you can follow your order until it arrives at your door. If you have any questions about your shipment, feel free to reach out to us at info@cavfab.com.

100% MADE IN THE USA

Our products are fabricated by a world class team of American craftsmen.