DIY Track Bar Bracket [Frame Side] (XJ / ZJ / MJ)

Be sure to check out our Current Lead Times before purchase.

This is a DIY Version of our Frame side Track Bar Bracket for Jeep XJ MJ ZJ Models. With it being DIY, it will require welding!

This is our universal Bracket, which can be used for all frame side bracket applications and incorporates a 2" stretch into the design for greater versatility in application, as it moves the trackbar forward. You do not need a stretched wheelbase in order to use this bracket.

  • 1/4" Thick Steel
  • Recommended minimum 2.5" of lift.
  • Accepts most joints with 2" Mounting Width and a 1/2" Bolt hole. (you can drill this out to accept larger hardware)
  • Requires Welding
  • Maximizes clearance with the front diff 
  • Maximizes clearance with a larger axle
  • Comes Raw, as it will need to be welded (You will want to powdercoat or clear coat after welding to maintain longevity)
  • Features Holes for our TracBar Bracket Brace