WJ Swap XJ 1 Ton Steering Kit [7075 Aluminum] [Flipped Tie Rod & Draglink]
$524.99
Have you made the swap to WJ knuckles but need a steering solution? Well...you've found it. CavFab has taken over the steering market by offering the most cost effective products, period.
You will need to furnish your own WJ Knuckles for this kit to work. Beyond that, this is a 100% bolt on upgrade!
If you are unfamiliar with the WJ knuckle swap, it entails swapping the stock knuckles to knuckles from a 99-04 Jeep Grand Cherokee. This has many benefits such as a raised drag link mount on the knuckle for flatter steering angles, independent tie rod / drag link mounts on the knuckle to lessen the stress as opposed to the factory knuckles, and the ability to run the much larger dual piston WJ brake setup.
For Flipping the Tierod and Draglink over the knuckle, drilling knuckles out to 7/8" to install tapered bushing is required.
1.5" SOLID 7075-T651 AL Tie Rod & Drag Link!
High Quality Long Lasting 1 Ton Tie Rod Ends
3 Knuckle Flip Sleeves
Superior CavFab Craftsmanship
High Clearance Design
NO BS WARRANTY
Requires Minimum 3" Of Lift
Requires 2.75" or numerically less backspacing on 15" wheels
Requires 4.75" or numerically less backspacing on 17" wheels
![WJ Swap XJ 1 Ton Steering Kit [7075 Aluminum] [Flipped Tie Rod & Draglink] - CavFab](http://cavfab.com/cdn/shop/files/Messenger-creation_1_f96d1e1d-aa50-4a94-98e3-2b3c0f5eaa98_2048x.jpg?v=1715973818)
